Parallel Graphic LCD Display Module

Description of Parallel graphic LCD display module ADM12864H
• Parallel graphic LCD display module 128 dots wide & 64 dots high display is an industry standard that can display images or any size letter or number necessary
• Parallel graphic LCD display module with FSTN mode has the sharpest contrast & highest quality image on the market
• Parallel graphic LCD display module operates in sub zero temperatures up to high temperatures without the need of a heater & with no loss of sharpness

Send Inquiry

Product Details

Parallel graphic LCD display module
Parallel graphic LCD display module ADM12864H

Brand name

Amotec

Dots

128*64

Dimension

75*52.7

controller

S6B0108

Power supply

5V

Description of Parallel graphic LCD display module ADM12864H

•Parallel graphic LCD display module 128 dots wide & 64 dots high display is an industry standard that can display images or any size letter or number necessary

•Parallel graphic LCD display module with FSTN mode has the sharpest contrast & highest quality image on the market

•Parallel graphic LCD display module operates in sub zero temperatures up to high temperatures without the need of a heater & with no loss of sharpness

Features

•128x64 dots graphic LCD module

•Low power consumption

•Built-in controller (S6B0108)

•+5V power supply

•1/64 duty cycle

•Easy interface with 8-bit MPU

•LED backlight optional

• Negative voltage optional

Mechanical Specifications

图片11_副本.png


Temperature Characteristics

Parameter

Symbol

Rating

Unit

Operating temperature

Top0 ~ +50

Storage temperature

Tst-10 ~ +60

*Wide temperature range is available
(operating/storage temperature as –20~+70/-30~+80℃)
Interface Pin Connections

Pin No.SymbolI/O TypeDescription

1

VDD

Supply

Power supply

2

VSS

Supply

Ground

3

V0

Supply

LCD driver supply voltage

4~11

DB0~DB7

I/O

Data bus [0~7]
Bi-directional data bus

12

CS2

I

Chip selection
When CS1=L,CS2=H, select IC1
When CS1=H,CS2=L, select IC2

13

CS1

14

RES

I

Reset signal.
When RES=L
【1】ON/OFF register becomes set by 0.(display off)
【2】display start line register becomes set by 0 (Z-address 0 set, display from line 0)
【3】After releasing reset , this condition can be changed only by instruction.

15

R/W


Read or Write
RW  Description
H Data appears at DB[7:0] and can be read by the CPU while
E= H CS1B=L,CS2B=L and CS3=H.
L Display data DB[7:0] can be written at falling edge of E
when CS1B=L, CS2B=L and CS3=H.

16

D/I


Data input/output pin of internal shift register
MS SHL DIO1 DIO2
H  H  Output  Output
H  L  Output Output
L  H   Input   Output

L  L   Output  Input

17

E


Enable signal
E  Description
H Read data in DB[7:0] appears while E=“High”.
L Display data DB[7:0] is latched at falling edge of E.

18

VEE

Power

VEE is connected by the same voltage.

19

A(LED+)


Power for backlight (Anode)

20

K(LED-)


Power for backlight (Cathode)

图片12.jpg

FAQ:

1.What is FSTN LCD ?

Answer :FSTN (Film-compensated Super-twisted Nematic) provides a sharper contrast than STN by adding a film. The cost is approximately 5% higher than STN. FSTN works great for indoor and outdoor applications and is mainly used in graphic displays and higher end products.

2.What is the temperature range ?

This display has a wide temperature range: -20° Celcius to +70° Celciuswhich equates to (-4° Fahrenheit to +158° Fahrenheit).
3.What are the applications of your products?
Answer: We provide one-stop solution for a wide range of applications in the fascinating digital world. The products are widely used in the fields of automotive, telecommunications, medical equipments, home appliances, industrial and consumer applications.
4.Can you design the LCD in accordance with our demand ?
Answer: Sure. We will offer you the best tooling charge and technical support .

Hot Tags: parallel graphic LCD display module, China, manufacturers, suppliers, factory, customized
Related Products

Inquiry

  • Your Name:
  • *E-mail:
  • Phone:
  • Company:
  • Title:
  • *Content: