Thin-Film-Transistor LCD Module Model: XTPQ24SN02-07 2.4''
2.4'' TFT LCD XTPQ24SN02-07 is a display module that contains a TFT display with a 320 * 240 RGB resolution.
The driver used for this 2.4'' TFT LCD display XTPQ24SN02-07 is ILI9341V (or compatible) and can display 262K colors.
The driver is mounted on the glass and the interconnection via FPC including components to drive the display module.
Thin-Film-Transistor LCD Module Model: XTPQ24SN02-07
2.4'' TFT LCD
Description of 2.4 inch LCD TFT displayXTPQ24SN02-07
36.72(H) x48.96 (V)
42.72(W) x 59.4(H) x 2.25MAX (D)
Gray viewing Direction
1.General Description and Features of 2.4 inch LCD TFT display XTPQ24SN02-07
2.4'' TFT LCD XTPQ24SN02-07 is a display module that contains a
TFT display with a 320 * 240 RGB resolution. The driver used for this
2.4'' TFT LCD display XTPQ24SN02-07 is ILI9341V (or compatible) and can
display 262K colors.
The driver is mounted on the glass and the interconnection via FPC
including components to drive the display module.
2 Electrical Characteristics of 2.4'' TFT LCD display XTPQ24SN02-07
2.1 TFT-LCD Module (DC Characteristics)
Digital Power Supply Voltage
Input High Threshold Voltage
Input Low Threshold Voltage
Power Supply Current
Note (1) The specified power consumption is under the conditions at VDD=3.3V , FV=60Hz, whereas a
Power dissipation check pattern below is displayed.
Black Pattern / 0 Gray
2.2 Backlight Unit
The back-light system is an edge-lighting type with3 white LEDs (Light Emitting Diode).
Note (1) Where IF = 15mA, VF = 9.3, PBL = VF × IF
3 Input Terminal Pin Assignment of 2.4'' TFT LCD XTPQ24SN02-07
3.1 Pin Assignment (LCD)
1. Why can't I get 2 different displays on a single DVI port using a splitter cable?
A DVI port only transmits a single graphics channel signal. A splitter for a DVI connection merely splits the same signal and sends the copied (Cloned) signal to one or the other port on the splitter. You cannot use DVI splitters to extend the screen across 2 displays. Not all DVI splitters sold will work to even clone and should not be used unless all other options have been exhausted.Older graphics adapters may contain a similar looking connection called DMS-59. A DMS-59 connection is designed to operate 2 displays in an extended configuration. DMS-59 is a legacy type connection and is not used in modern graphics adapters. This product is still available in limited product lines.
2.How many adapters can I use when connecting a display that has different ports than my graphics card?
At the most, you may be able to configure your display with a single cable adapter. Anytime an adapter is added to a cable connection there is a signal loss in the conversion process. in almost all cases, using more than one adapter between the graphics adapter (video card) port and the LCD display will cause a loss of, or very degraded signal.
3.Why am I not getting a signal using a cable adapter?
Cable conversions can only be digital to digital or digital to analog, you cannot change from analog to digital using only a cable adapter (Digital to analog conversion does work well)